Size Guide

All pieces are made to order on heavyweight blanks, so true-to-size measurements matter more than the number on the tag. Use the charts below — taken from the garment, laid flat — to find your fit before ordering.

Tees

Garment-dyed heavyweight cotton. Measurements in inches:

Size	Body Width (laid flat)	Body Length
Small	18.25"	26.625"
Medium	20.25"	28"
Large	22"	29.375"
XL	24"	30.75"
2XL	26"	31.625"

Note: garment-dyed tees run about half a size smaller than a standard tee — if you're between sizes, we recommend sizing up.

Long Sleeves

Same garment-dyed heavyweight cotton body as the tee, cut with a long sleeve and ribbed cuffs. Measurements in inches:

Size	Body Width (laid flat)	Body Length	Sleeve (from centre back)
Small	18.25"	26.625"	31.875"
Medium	20.25"	28"	33.75"
Large	22"	29.375"	35.625"
XL	24"	30.75"	37.25"
2XL	26"	31.625"	38.75"

Note: the long sleeve shares the body dimensions of the tee, so if you know your tee size it carries straight over. Same half-size-smaller guidance applies.

Hoodies

Heavyweight fleece — structured, built to hold its shape through the wash. Measurements in inches:

Size	Body Length	Chest (laid flat)	Sleeve Length
Small	28.5"	21"	34.5"
Medium	29.5"	23"	35.5"
Large	30.5"	24.5"	36.5"
XL	31.5"	26.5"	37.5"
2XL	32.5"	27.5"	38.5"

How to Measure

Body Length: From the high point of the shoulder straight down to the hem.

Chest / Body Width: Straight across the garment laid flat, about 1" below the armhole, then doubled for full chest circumference.

Sleeve Length: From the centre back of the neck, across the shoulder, down to the end of the cuff.

These are flat-lay figures and can vary by roughly half an inch between garments — normal for garment-dyed and heavyweight blanks.

Still unsure? Email info@stateofresonance.ca with your usual size in other brands and we'll help you pick.